ExploreTrendingAnalytics
Nostr Archives
ExploreTrendingAnalytics
Jason Ansley | Fractional COO | Leadership Coach7d ago
@Max I figured you might be a good person to ask; I recently started mining Monero via Gupaxx (2 x’s due to the ability to upgrade to Gupax [one x] once v2 production is released). I tried to see my pool share towards payout via mini.gupaxoberver but it indicated I didn’t have any submissions (albeit gupaxx app shows over 10k accepted) Do you know where to check p2pool share count (towards payout) for Gupaxx Mini sidechain?
💬 8 replies

Replies (8)

Max7d ago
I'm not really the guy to ask for that, I have very limited mining experience... But it might be you are using the wrong observer, try mini.p2pool.observer
0000 sats
Jason Ansley | Fractional COO | Leadership Coach5d ago
Thanks for the assist. Turns out its most likely due to switching from nano to mini, which also switched from remote node to local node and I didn’t have a local node running yet 🤪
0000 sats
Saberhagen The Nameless6d ago
Hey @shortwavesurfer2009 think you can help him out? If you can't find an answer on here I would recommend going to the Monero group on SimpleX and just ask the group in general. I'm sure someone will have an answer for you. https://smp4.simplex.im/g#YdVKQcI2JIZuTzfFlQfhNg-SnNaxA73…
0000 sats
Saberhagen The Nameless6d ago
Hey @shortwavesurfer2009 think you can help him out? If you can't find an answer on here I would recommend going to the Monero group on SimpleX and just ask the group in general. I'm sure someone will have an answer for you. https://smp4.simplex.im/g#YdVKQcI2JIZuTzfFlQfhNg-SnNaxA73…
0000 sats
shortwavesurfer20096d ago
How much hashrate do you have? If it's less than 10K hash, I highly recommend nano instead of mini. Also, try mini.p2pool.observer since you have been mining too mini, and if you switch to nano you would go to nano.p2pool.observer
0000 sats
shortwavesurfer20096d ago
How much hashrate do you have? If it's less than 10K hash, I highly recommend nano instead of mini. Also, try mini.p2pool.observer since you have been mining too mini, and if you switch to nano you would go to nano.p2pool.observer
0000 sats
Jason Ansley | Fractional COO | Leadership Coach5d ago
Appreciate the direction. I think it was a node sync issue. Will soon find out
0000 sats
Jason Ansley | Fractional COO | Leadership Coach5d ago
Appreciate the direction. I think it was a node sync issue. Will soon find out
0000 sats
Jason Ansley | Fractional COO | Leadership Coach5d ago
Thanks. So about 1.2khs I’m willing to drop to nano but based on the P2Pool benchmarks, I should be good on Mini. That being said, today I think I figured out the issue(s) 1. Updated to Gupax v2 as that was released yesterday 2. Updated Monerod, P2Pool, and XmRig to latest versions 3. “Started” Monerod (Node) <<< that was most likely the issue. At first I was using simple settings on P2Pool which used remote nodes. But when I switched to Advanced for Mini access, It switched to local node which I didn’t realize I had to spin up About 63% synced on the node. So in the morning it should be ready for me to fire up p2pool and xmrig again. But using local node not remote
0000 sats
Jason Ansley | Fractional COO | Leadership Coach5d ago
Thanks. So about 1.2khs I’m willing to drop to nano but based on the P2Pool benchmarks, I should be good on Mini. That being said, today I think I figured out the issue(s) 1. Updated to Gupax v2 as that was released yesterday 2. Updated Monerod, P2Pool, and XmRig to latest versions 3. “Started” Monerod (Node) <<< that was most likely the issue. At first I was using simple settings on P2Pool which used remote nodes. But when I switched to Advanced for Mini access, It switched to local node which I didn’t realize I had to spin up About 63% synced on the node. So in the morning it should be ready for me to fire up p2pool and xmrig again. But using local node not remote
0000 sats