Frederik Handberg4d agoThis is the 3rd t-shirt I’m #sewing.
The first one, I had made the neckband way too long and the top-stitching was bad. But the sizing was good, so my pattern that I made in CLO3D turned out really great.
The second one was pretty good. Neckband was perfect length, but the neck cutout on the back piece was too far down I think.
On this third version I have changed the neck cutout slightly on the back piece, but otherwise everything is the same.
💬 0 replies
Replies (3)
Frederik Handberg4d agoI need a real tailoring scissor, but they are expensive… This one I got is the cheapest you can find and it sucks 😂
0000 sats
Frederik Handberg4d agoThink I need to adjust the thread tension on the 4-thread overlock/serger just a tad, but I find it difficult to know which dial is responsible for what...
0000 sats
Frederik Handberg4d agoMaking patterns in CLO3D is so much easier than doing the actual sewing 😂
I feel like the hardest part of sewing the t-shirts is actually the hemming of sleeves and bottom of body pieces.
I don't have an interlock machine _(would have made it so much easier, but it's an expensive machine and requires too much space that I probably don't have)_, so I first overlock the edge then do double topstitch with my single-needle lockstitch. Getting these topstitches aligned perfectly is not an easy task...
0000 sats